Questions? REQUEST CALLBACK Free Call :1800 396 264

QBCC No. 1276065

Roll & Fold Clear Partition


PART 1 – GENERAL

 
    • 1.01 SUMMARY
 
    • A. Section Includes: Manual folding partition.
    • KEEP B AND C 1. BELOW IF NOT USING MANUFACTURER’S STANDARD CYLINDERS 
    • B. Products Not Installed Or Supplied Under This Section: Keyed mortise cylinders.
    • C. Related Sections: Site preparation, track support and other miscellaneous structural or finish work is in the scope of work of other sections.
    •     1. Section 08710 – Door Hardware; keyed mortise cylinders.
 
    • 1.02 SUBMITTALS
 
    • A. Reference Section 01330 Submittal Procedures; submit following items:
    •      1. Product Data: Include published data and specific data prepared for this project.
    •      2. Shop Drawings: Include plans, elevations, required clearances and accessories.
    •      3. Installation Instructions: If Required.
    •      4. Quality Assurance Requirements: If Required.
    •          a. Manufacturer Qualifications.
    •          b. Installer Qualifications.
    •          c. Certificates.
 
    • 1.03 QUALITY ASSURANCE
 
    • A. Manufacturer Qualifications: Minimum of three years experience in the fabrication and installation of Side Folding Security Door.
    • B. Installer Qualifications: Authorized representative of the manufacturer.
    • C. Certificate stating that materials and finishes comply with specifications.
    • D. Pre-installation Conference: Schedule and convene a pre-installation conference just prior to commencement of field operations to establish procedures to maintain optimum working conditions and to coordinate this work with related and adjacent work. If Required.
 
    • 1.04 WARRANTY
 
    • A. Limited Warranty: One year from the time of installation for defective materials and workmanship.
      PART 2 – PRODUCTS 
 
    • 2.01 MANUFACTURER 
   
    • 2.02 MODELS AND MATERIALS
 
    • A. Model: ROLL & FOLD CLEAR PARTITION
    • B. Curtain: Framed with extruded aluminium tube extrusions.  Panels shall be glazed with 3mm Polycarbonate with 100% viewable area.  Panels to be connected by steel hinges at each corner allowing a maximum pivot angle of 150 degrees for stability. Bottom hinges shall have 51mm non marking rollers. Pattern: Full Sheet Polycarbonate
    • C. Curtain Height: Variable to 2000mm.
    • D. Finish: Standard finish is clear anodized.  Powder coating (Dulux Colour Range) and Anodizing in colours is an optional extra.
    • E. Locking Posts: Reference Drawing F. Operation: Manual pull – push operation.  All Roll & Folds must be operated and moved by 2 persons once all Bracing Brackets are engaged.
      PART 3 - EXECUTION 
 
    • 3.01 EXAMINATION
 
    • A. Examine supports and other conditions under which Doors are to be installed.
    • B. Coordinate with responsible entity to correct unsatisfactory conditions and do not proceed with installation until conditions are corrected.
 
    • 3.02 INSTALLATION
 
    • A. Follow manufacturer’s installation instructions and approved shop drawings.
 
    • 3.03 ADJUSTING
 
    • A. Test operation of Door and adjust as necessary to provide smooth and proper operation.
 
    • DEMONSTRATION
 
  • Instruct Owner’s personnel in proper operating and maintenance procedures.
Download PDF

Free Standing Doors / Grilles

Read More

Roll & Fold Paravent Partition

Read More