Questions? REQUEST CALLBACK Free Call :1800 396 264

QBCC No. 1276065

Roll & Fold Paravent Partition


PART 1 – GENERAL

 
    • 1.01 SUMMARY 
 
    • A. Section Includes: Manual folding partition.
    • KEEP B AND C 1. BELOW IF NOT USING MANUFACTURER’S STANDARD CYLINDERS 
    • B. Products Not Installed Or Supplied Under This Section: Keyed mortise cylinders.
    • C. Related Sections: Site preparation, track support and other miscellaneous structural or finish work is in the scope of work of other sections.
    •     1. Section 08710 – Door Hardware; keyed mortise cylinders
 
    • 1.02 SUBMITTALS
 
    • A. Reference Section 01330 Submittal Procedures; submit following items:
    •      1. Product Data: Include published data and specific data prepared for this project.
    •      2. Shop Drawings: Include plans, elevations, required clearances and accessories.
    •      3. Installation Instructions: If Required.
    •      4. Quality Assurance Requirements: If Required.
    •           a. Manufacturer Qualifications.
    •           b. Installer Qualifications.
    •           c. Certificates.
 
    • 1.03 QUALITY ASSURANCE
 
    • A. Manufacturer Qualifications: Minimum of three years experience in the fabrication and installation of Side Folding Security Door.
    • B. Installer Qualifications: Authorized representative of the manufacturer.
    • C. Certificate stating that materials and finishes comply with specifications.
    • D. Pre-installation Conference: Schedule and convene a pre-installation conference just prior to commencement of field operations to establish procedures to maintain optimum working conditions and to coordinate this work with related and adjacent work. If Required.
 
    • 1.04 WARRANTY
 
    • A. Limited Warranty: One year from the time of installation for defective materials and workmanship.
      PART 2 – PRODUCTS 
 
    • 2.01 MANUFACTURER
   
    • 2.02 MODELS AND MATERIALS
 
    • A. Model: ROLL & FOLD PARAVENT PARTITION
    • B. Curtain: Framed with extruded aluminium tube extrusions.  Panels shall be glazed with 18 gauge perforated steel Powder Coated panels with 4.5mm perforations providing 51% visibility.  Panels to be connected by steel hinges at each corner allowing a maximum pivot angle of 150 degrees for stability. Bottom hinges shall have 51mm non marking rollers. Pattern: Full Sheet Perforated Steel.
    • C. Curtain Height: Variable to 2000mm.
    • D. Finish: Standard finish is clear anodized.  Powder coating (Dulux Colour Range) and Anodizing in colours is an optional extra.
    • E. Locking Posts: Reference Drawing F. Operation: Manual pull – push operation.  All Roll & Folds must be operated and moved by 2 persons once all Bracing Brackets are engaged.
      PART 3 - EXECUTION 
 
    • 3.01 EXAMINATION
 
    • A. Examine supports and other conditions under which Doors are to be installed. B. Coordinate with responsible entity to correct unsatisfactory conditions and do not proceed with installation until conditions are corrected.
 
    • 3.02 INSTALLATION
 
    • A. Follow manufacturer’s installation instructions and approved shop drawings.
    • 3.03 ADJUSTING
 
    • A. Test operation of Door and adjust as necessary to provide smooth and proper operation.
    • DEMONSTRATION
 
  • Instruct Owner’s personnel in proper operating and maintenance procedures.
Download PDF

Free Standing Doors / Grilles

Read More

Roll & Fold Clear Partition

Read More